a new I2C demonstration board kit that is available only from
I2C2005-1 kit - Link to NXP Semiconductors page
The I2C2005-1 kit
includes demo I2C software (Win-I2CUSB Lite), which has similar operation,
but reduced functionality compared
to the full Win-I2CUSB software included in our Win-I2CUSBDLL kit.
Please note the Win-I2CUSB
Lite software developed for the NXP(Philips) I2C2005-1 evaluation
board is NOT directly compatible
with the USB hardware adapter included with our Win-I2CUSBDLL kit.
Conversely, our Win-I2CUSBDLL kit software is NOT directly compatible with the I2C2005-1 evaluation board.
Note: The earlier
is still available, but the I2C cable configuration must be modified to
board to the Win-I2CUSBDLL kit.
For customers who own a Win-I2CUSBDLL kit, the Win-I2CUSB/DLL software can be used with the I2C2005-1
demonstration board by removing the socketed microcontroller from their existing Win-I2CUSBDLL kit adapter:
Win-I2CUSBDLL kit adapter
replacing the socketed Microcontroller in the I2C2005-1 demonstration board
!! (do not discard the 2005-1 board Microcontroller, since it is required for compatibility to Win-I2CUSB Lite, if desired later) !!
NXP (Philips) I2C2005-1 I2C demonstration board
The Boardshop will not be held responsible for possible damage to Win-I2CUSB
or other accociated/connected hardware as a result of user's attempting this microcontroller substitution procedure!
Please remove power/cables, observe device/socket orientations, and use ESD handling if attempting this procedure.
HOME Go to I2C Products
June 30, 2007